|
|||||||||||||
|
|
|
|
|
|
||||||||
|
|||||||||||||
|
|
|
|
|
|
|
|
||||||
|
|||||||||||||
| MODEL | iMaster 400 | iMaster600 | iMaster1000 | ||
| CAPACITY | VA/W | 400 VA / 200W
|
600VA / 300W
|
1000VA/600W
|
|
| INPUT | Phase | Single | |||
| Voltage | 110/120VAC or 220/230/240VAC | ||||
| Voltage Range | 90 - 145VAC / 170 - 280VAC | ||||
| Frequency | 50~60Hz | ||||
| Frequency Range | Un-Limit Frequency Range | ||||
| OUTPUT | Phase | Single
|
|||
| Voltage | 120VAC or 220VAC |
||||
| Voltage Regulation( Batt. Mode ) |
± 10%
|
||||
| Frequency | 50Hz
or 60Hz
|
||||
| Frequency Regulation( Batt. Mode ) | +
/ -1Hz
|
||||
| Output Waveform( Batt. Mode ) | Modified
Sinewave
|
||||
| POWER FACTOR | P.F. | 0.5 | 0.5 | 0.6 | |
| BATTERY | Battery Type and number | 12V/4.5Ah x 1pc | 12V/7.2Ah x 1pc | 12V/7.2Ahx2pcs | |
| Back up Time(at a PC load with 15" moniter) | 6~9 minutes
|
13~20
minutes
|
30
minutes
|
||
| Recharge Time | 16 hous max.(to 90% after Capacity) | 10 hours max.(to 90% Capacity) | |||
| TRANSFER TIME | Typical | 2 - 6ms | |||
| INDICATOR | AC Mode | Green LED lighting | |||
| Battery Mode | Green LED flashing every 4 seconds | ||||
| Low Battery at Battery Mode | Green LED flashing every second | ||||
| Fault | Red LED lighting | ||||
| Battery Weak at AC mode | Red LED flashing every 2 seconds for 30 seconds | ||||
| Battery Fault at AC mode | Red LED flashing 3 times every 2 seconds | ||||
| Overload | N/A | Red LED flashing twice every second | |||
| AUDIBLE ALARM | Battery Mode | Sounding every 4 seconds | |||
| Low Battery at Battery Mode | Sounding every seconds | ||||
| Fault | Continously sounding | ||||
| Battery Weak at AC mode | Sounding every 2 seconds for 30 seconds | ||||
| Battery Fault at AC mode | Sounding 3 times every 2 seconds | ||||
| PROTECTION | Full Protection | Discharge, overcharge, and overload protection*( Only for MaxPower 1000) | |||
| PHYSICAL | Dimension , DxWxH ( mm ) | 176.5 x 80 x 230 | 280 x 90.6 x 237.7 | ||
| Net Weight ( kgs ) | 2.5 | 3.1 | 6.5 | ||
| ENVIRONMENT | Operating Environment | 0~40 Degrees Centigrade, 0~90% relative humidity( non - condensing ) | |||
| Noise Level | Less than 45dB | ||||
* Product specifications are subject to change without further notice