![]() |
|||||||||||||
![]() |
|||||||||||||
| MODEL | Blazer Vista1000
|
Blazer
Vista 1400
|
Blazer Vista
2000
|
|
| CAPACITY | VA/W | 1000VA/600W
|
1400VA/840W
|
2000VA/1200W
|
| INPUT | Phase | Single
|
||
| Voltage | 115VAC or 220/230/240VAC |
|||
| Voltage Range | 85-140VAC
/ 162-290VAC +/- 5%
|
|||
| Frequency | 50Hz
/ 60Hz (Auto Sensing)
|
|||
| Frequency Range |
45~55 Hz / 55Hz~65Hz
|
|||
| OUTPUT | Phase | Single
|
||
| Voltage(Btt. Mode) | 115VAC or 230 VAC |
|||
| Voltage Regulation(Batt. Mode) | ±10%
|
|||
| Frequency | 50Hz
or 60Hz
|
|||
| Frequency Regulation (Batt. Mode) |
+/-1 Hz
|
|||
| Output Waveform | Modified
Sinewave
|
|||
| Power Factor | P.F. |
0.6
|
0.6 |
0.6 |
| BATTERY | Battery Type & Number * | 12V/7AH x 2pcs |
12V/9AH x 2pc |
|
| Back up Time (at a 2 PC load with 15" monitor) | 18~20 minutes
|
25 minutes
|
26 minutes
|
|
| Recharge Time | 8
hours to 90% after complete discharge
|
|||
| TRANSFER TIME | Typical | 4-6ms
|
||
| INDICATOR | LCD Indicator with Blue Back Light | The LCD will self turn on when the UPS is functioning including in, off, charging mode and fault mode | ||
| AUDIBLE ALARM | Battery Mode |
Sounding every 10
seconds
|
||
| Low Battery | Sounding
every second
|
|||
| Overload |
Sounding every 0.5
second
|
|||
| Battery Replacement |
Sounding every 2
seconds
|
|||
| Fault |
Continously sounding
|
|||
| PROTECTION | Full Protection |
Discharge, overcharge,
and overload protection
|
||
| PHYSICAL | Dimension, DXWXH (mm) |
368.3X140.2X180.4
|
||
| Net Weight (kgs) | 13.8
|
14.2
|
16
|
|
| ENVIRONMENT | Operating Environment |
0~40 Degrees Centigrade, 0~90%
relative humidity (non-condensing)
|
||
| Noise Level |
AC Mode: Less than
40dB
Backup Mode: Less than 45dB |
|||
| INTERFACE | Smart RS-232 |
Support Windows family, Linux, IBM Aix, Sun Solaris, Compaq True64, UnixWare,
FreeBSD,
HP-UX, and MAC
|
||
* We will use equivalent type of batteries when mentioned batteries are in shortage.
** Product specifications are subject to change without further notice