|
|||||||||||||
|
|
|
|
|
|
||||||||
|
|||||||||||||
|
|
|
|
|
|
|
|
||||||
|
|||||||||||||
| MODEL | INVEREX
500
|
INVEREX
1000
|
INVEREX
2000
|
|
| CAPACITY | VA/W | 500VA / 300W
|
1000VA / 600W
|
2000VA / 1200W
|
| INPUT | Phase | Single
|
||
| Voltage | 110 / 120VAC or 220 / 230 / 240VAC |
|||
| Voltage Range | 90 - 145VAC or 170-280VAC
( Narrow Range )
|
|||
50-145VAC / 90-280VAC
(Wide Range)
|
||||
| OUTPUT | Phase | Single |
||
| Voltage | 120VAC or 230VAC |
|||
| Voltage Regulation(Batt. Mode) | +10% ~ 18%
|
|||
| Frequency | 50Hz or 60Hz
|
|||
| Frequency Regulation (Batt. Mode) | +/- 0.1 Hz
|
|||
| Output Waveform (Batt. Mode) | Modified Sine Wave
|
|||
| POWER FACTOR |
P.F. |
0.6 |
||
| BATTERY | Charger Current |
8 Amp + / - 1Amp |
6 Amp + / - 1Amp |
10 Amp + / - 1Amp |
| Floating Voltage | 13.7V + / - 0.2V
|
27.4V + / - 0.4V
|
27.4V + / - 0.4V
|
|
| Overcharge Protection | 15V +/- 0.3V charger
stops and fault
|
15V +/- 0.6V charger
stops and fault
|
30V +/- 0.6V charger
stops and fault
|
|
| TRANSFER TIME | Typical | 8ms
|
||
| EFFICIENCY | AC to AC | >95%
|
||
| DC to AC | >80%
|
|||
| INDICATOR | AC Mode | Green LED lighting
|
||
| Battery Mode | Yellow LED lighting
|
|||
| Battery Charging Mode | Green LED flashing every 2 seconds
|
|||
| Overload | Red LED flashing every
0.5 second
|
|||
| Fault | Red LED lighting
|
|||
| AUDIBLE ALARM | Low Battery at Battery Mode | Sounding every 2
seconds
|
||
| Overload | Sounding every 0.5
second
|
|||
| Fault | Continously sounding
|
|||
| PROTECTION | Full Protection | Deep Discharge, Overcharge,
and Overload protection
|
||
| PHYSICAL | Dimension (D x W x H) mm | 224 X 255 X 80
|
||
| Net Weight (kgs) | 1.7
|
1.9
|
2.5
| |
| ENVIRONMENT | Operating Environment | 0~40 Degrees Centigrade, 0~90%
relative humidity (non-condensing)
|
||
| Noise Level | Less than 50dB
|
|||
* Product specifications are subject to change without further notice